arai 3/4 helmet Arai Helmets Integral road , Arai rx 7 gp rc integral road grey helmets,arai xd 5,Authentic USA Online arai corsair helmet,Official
the new arai rx-7 gp offers features that have never before been available on any other helmet.
the ‘’pb snc’’ outer shell is completely new with a peripherally belt offering incredible rigidity and strength to the already immensely strong
snc (structural net composite) super fiber shell construction. stability of the rx-7 gp is further improved thanks to the adjustable aero wing,
reducing drag, turbulence and buffeting. with the rx-7 gp arai has once more set the standard in the premium helmets class.
diffuser ventilation system offers enhanced adjustable intake and exhaust ports for increased airflow and reduced wind turbulence. the middle-intake slot creates an accelerated venturi effect for faster venting of stale air. effective, lower side vents reduce wind noise en prevent buffeting. three-position chin vent (including demist function). unique arai brow vents guide fresh air to the temples and forehead area.
snc reinforced shell:
incorporates a structural net reinforcing material embedded between arai’s exclusive super complex laminate layers to further improve shell integrity and impact-force management. overall helmet weight is reduced, while the centre of gravity is lowered, resulting in better balance and reduced fatigue for more comfort.
patented air wing®:
motogp tested and designed to greatly reduce drag, turbulence and buffeting. resulting in more comfort and additional top-speed. it improves
stability of the helmet at high speeds or when braking hard and reduces noise. adjustable in five different angles of attack positions to suit every
facial contour system:
to offer an even better snug fit and enhancing the comfort to the lower jaw, the facial contour system (fcs) works with a foam spring support in
the cheek pad that compresses and rebounds.
pb (peripherally belted):
consists of a strengthening belt across the helmet, just above the visor opening, to reinforce the forehead area of the shell. it was devised during
f-1 helmet development.
5mm ’’peel away’’:
5mm thick removable foam layer on the ear cups/cheek pads and temple pads. offering more room if desired without the need to purchase an optional headliner or new pads/ear cups.
emergency release system:
allows easier access to an injured rider. by pulling the orange tabs integrated in the pads, the cheek pads slide out. making helmet removal easier
for trained medical personnel and rescuers. minimising the risk of additional injury.
ece 22-05 and snell m2010 approved:
this is one of the few models fully approved to ece 22-05 and snell m2010 standards.
five times inspected:
each arai helmet goes through five separate quality-control departments: after the shell is made, after painting and graphic completion,
after assembly and two in-process inspections.
the premium quality interior of any arai helmet can be easily cleaned, in place, with mild soap and lukewarm water
it can take up to five years for our experts to earn the right to create an arai shell. each shell can take up to 27 steps and to build one arai helmet will take about 18 man-hours.
all-day comfort with the arai interior fit and shape together with the finest liner materials and the extensive ventilation system. and thanks to the
perfect balance and weight distribution of the helmet, you hardly notice you are wearing an arai.
all arai helmets are penetration tested, although not required by european helmet standards. the arai penetration test is performed with a 3kg
test cone that strikes from a height of 3m on the helmet.
double-d ring device:
the flat and d-shaped rings fit smooth against the chin. no moving parts, no corrosion problems and just pulling the tab is enough to loosen
smooth shape, better protection:
the smooth outer shell of arai helmets is designed to glide without unnecessary resistance. you don’t want to decelerate your helmet more
than necessary. that’s why all arai vents and ducts are designed to break off during an impact.
hard outer shell, soft inner shell:
arai uses a very hard outer shell to spread impact forces and a soft inner shell to absorb remaining energy. the multiple-density eps inner shell is
made using a unique technology of combining three to five densities in various areas as a single component.
the organic shape of an arai outer shell offers a more natural appearance, seals better and conforms more to the head’s natural shape
for improved comfort, fit and to help minimize wind turbulence.
5-year limited warranty:
all arai helmets are warranted against defects in materials and workmanship, and are serviceable only for the properly fitted first user for 5 years
from date of first use, but no more than 7 years from date of manufacture.
different outer shells:
unlike many other manufacturers arai provides one size outer shell for each two-helmet sizes for most models. together with different shaped outer shells for different models it is almost impossible not to find the fit you are looking for.
arai in-house test:
this arai helmet is designed to meet the stringent arai in-house standard requirements, in addition to mandatory standards such as ece 22-05 and voluntary standards such as snell m2010.
helmets are always delivered with a transparent screen.
at this moment, the product arai rx 7 gp rc
is in stock at arai
outlet on sale atlanta . find out what other motorcycle
products, the brand arai
has at your online motorcycle
store. make any outfit your own with this season´s selection of integral road
models. at arai
sale atlanta we stock the latest styles and designs of helmets
. browse through our selection and find the motorcycle
item that suits your needs.
arai - helmets - integral road,weight: over 1500 gr,approval: ece-22.05,approval: snell,color: grey